The first thing you will see when unboxing your starter kit is a Wiliot Coffee Cup, with 3 IoT Pixels attached. The Wiliot IoT Pixels contain aluminum and are not waterproof, therefore please do not microwave your coffee cup or put it in the dishwasher, hand-wash only.
To the right of your Wiliot Coffee Cup is the Quick Start Guide, pointing you to the Wiliot Getting Started page.
Beneath the Quick Start Guide are 8 Wiliot IoT Pixels on cardboard samples. The cardboard samples are designed to stand vertically, facing the corresponding bridge device, much like a picture frame.
Underneath the Wiliot Pixels, you will find the Works with Wiliot Bridges and Bridge Stand. These devices are used to energize your IoT Pixels. The Bridge Stand is used to orient the Dual-Band Bridge vertically so that it faces the IoT Pixels on cardboard samples.
At the very bottom of your Starter Kit you will find the Bridges' Power Cable and AC Plug.
Bring-Up: Coffee Cup
First, stand up the Dual-Band Bridge using the Bridge Stand, and plug in using the included power cable and plug.
In parallel, place your Coffee Cup close to your Dual-Band Bridge (< 1 meter), with the Bridge "facing" the cup. We start close to the bridge so there is more energy for harvesting, resulting in a faster time to receive the first data packet. For optimal performance, the IoT Pixel on top of the Coffee Cup should be right side up towards the bridge.
Once logged in, the IoT Pixels on your Wiliot Coffee Cup should then appear in your Wiliot App in less than 30 seconds. Once it appears, feel free to push the Coffee Cup further away towards the edge of its harvesting range and start experimenting.
Within the Wiliot App, users can observe the data coming from their Wiliot Coffee Cup such as temperature. Soon, users will also be able to access the Wiliot Automation Platform to start running their own playbooks and setting business rules.